Fully Adhered
The sheet is bonded to the substrate for a smooth finish without fasteners.
TPO is a heat-welded, reflective membrane built for flat roofs. We install and repair it, and explain when it's the right choice for your building.
TPO is a single-ply membrane, usually white or light in color, whose seams are melted together with hot air into one continuous sheet. Because the seams are fused instead of glued, a well-made TPO roof behaves like one large sheet.
TPO is one of several flat roofing membranes we install and repair. Visit our Bronx roofing pros homepage for everything else we handle.
TPO is common on flat and low-slope roofs of apartment buildings, shops, and other commercial properties, where its reflective surface and welded seams suit large, continuous roof areas.
Most TPO problems show up at welds, corners, and edges. We confirm the membrane type, then clean, re-weld, or patch with compatible material, and test seams to confirm they're fully fused.
TPO is usually white with heat-welded seams and more reflectivity, while EPDM is black or white rubber with glued or taped seams. TPO often suits buildings that want a cooler roof surface, while EPDM has a long track record and handles cold weather well. See our EPDM roofing page for a closer look.
| Factor | How It Changes the Job |
|---|---|
| Sheet thickness and reflectivity | Thicker, higher-grade sheets cost more but can last longer. |
| Installation method | Fully adhered and mechanically attached systems differ in labor and material. |
| Welding and detail work | More seams, penetrations, and edges add labor. |
| Insulation condition | Wet insulation found during installation adds replacement cost. |
TPO suits roofs where reflectivity and welded-seam durability are priorities, especially on larger commercial buildings. We'll inspect your roof and tell you honestly whether TPO, EPDM, or modified bitumen fits it best.
A well-installed and maintained TPO roof commonly lasts 20 to 25 years, depending on installation quality and exposure.
A reflective surface can lower roof temperatures and may reduce heat entering the building on hot days. The actual savings depend on your insulation, ventilation, and how clean the surface stays, so treat it as a possible benefit, not a guarantee.
Yes, in most cases. We clean the area and re-weld or patch it with compatible material, then test the seam to confirm it's fully fused.
TPO surfaces collect dirt over time, which reduces reflectivity. Regular cleaning helps maintain both appearance and performance.
Both are single-ply, heat-welded membranes, but they use different chemistries. We work primarily with TPO and can advise on what suits your specific roof.
Often yes, though it depends on the roof structure, attachment method, and local requirements. We'll confirm how the roof can support the added load and equipment.
Call Bronx Roofing Pros
Describe your roof and we'll tell you whether TPO fits. Call (718) 719-0780.
(718) 719-07802243 White Plains Rd, Bronx, NY 10467